diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 54bff65..8a577ac 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -887,8 +887,8 @@
 	imx6ul-phytec-segin-ff-rdk-nand.dtb \
 	imx6ul-pico-hobbit.dtb \
 	imx6ul-pico-pi.dtb \
-	imx6ul-kontron-n631x-s.dtb \
-	imx6ull-kontron-n641x-s.dtb
+	imx6ul-kontron-bl.dtb \
+	imx6ull-kontron-bl.dtb
 
 dtb-$(CONFIG_MX6ULL) += \
 	imx6ull-14x14-evk.dtb \
diff --git a/arch/arm/dts/imx6ul-kontron-bl-43.dts b/arch/arm/dts/imx6ul-kontron-bl-43.dts
new file mode 100644
index 0000000..0c64370
--- /dev/null
+++ b/arch/arm/dts/imx6ul-kontron-bl-43.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul-kontron-bl.dts"
+
+/ {
+	model = "Kontron BL i.MX6UL 43 (N631X S 43)";
+	compatible = "kontron,bl-imx6ul-43", "kontron,bl-imx6ul",
+		     "kontron,sl-imx6ul", "fsl,imx6ul";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm7 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+};
+
+&i2c4 {
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cap_touch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+	/* Leave status disabled because of missing display panel node */
+};
+
+&pwm7 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_cap_touch: captouchgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0 /* Touch Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0 /* Touch Reset */
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Touch Wake */
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__PWM7_OUT		0x110b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6ul-kontron-n6x1x-s-u-boot.dtsi b/arch/arm/dts/imx6ul-kontron-bl-common-u-boot.dtsi
similarity index 100%
rename from arch/arm/dts/imx6ul-kontron-n6x1x-s-u-boot.dtsi
rename to arch/arm/dts/imx6ul-kontron-bl-common-u-boot.dtsi
diff --git a/arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/dts/imx6ul-kontron-bl-common.dtsi
similarity index 100%
rename from arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi
rename to arch/arm/dts/imx6ul-kontron-bl-common.dtsi
diff --git a/arch/arm/dts/imx6ul-kontron-n631x-s-u-boot.dtsi b/arch/arm/dts/imx6ul-kontron-bl-u-boot.dtsi
similarity index 74%
rename from arch/arm/dts/imx6ul-kontron-n631x-s-u-boot.dtsi
rename to arch/arm/dts/imx6ul-kontron-bl-u-boot.dtsi
index d3f013c..daf4175 100644
--- a/arch/arm/dts/imx6ul-kontron-n631x-s-u-boot.dtsi
+++ b/arch/arm/dts/imx6ul-kontron-bl-u-boot.dtsi
@@ -4,4 +4,4 @@
  * Copyright (C) 2018 Kontron Electronics GmbH
  */
 
-#include "imx6ul-kontron-n6x1x-s-u-boot.dtsi"
+#include "imx6ul-kontron-bl-common-u-boot.dtsi"
diff --git a/arch/arm/dts/imx6ul-kontron-bl.dts b/arch/arm/dts/imx6ul-kontron-bl.dts
new file mode 100644
index 0000000..dadf6d3
--- /dev/null
+++ b/arch/arm/dts/imx6ul-kontron-bl.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-kontron-sl.dtsi"
+#include "imx6ul-kontron-bl-common.dtsi"
+
+/ {
+	model = "Kontron BL i.MX6UL (N631X S)";
+	compatible = "kontron,bl-imx6ul", "kontron,sl-imx6ul", "fsl,imx6ul";
+};
diff --git a/arch/arm/dts/imx6ul-kontron-n631x-s.dts b/arch/arm/dts/imx6ul-kontron-n631x-s.dts
deleted file mode 100644
index 407d2b1..0000000
--- a/arch/arm/dts/imx6ul-kontron-n631x-s.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-/dts-v1/;
-
-#include "imx6ul-kontron-n631x-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N631X S";
-	compatible = "kontron,imx6ul-n631x-s", "kontron,imx6ul-n631x-som",
-		     "fsl,imx6ul";
-};
diff --git a/arch/arm/dts/imx6ul-kontron-n6x1x-s.dts b/arch/arm/dts/imx6ul-kontron-n6x1x-s.dts
deleted file mode 100644
index 84d8a71..0000000
--- a/arch/arm/dts/imx6ul-kontron-n6x1x-s.dts
+++ /dev/null
@@ -1,423 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6ul-kontron-n6x1x-som.dtsi"
-
-/ {
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led1 {
-			label = "debug-led1";
-			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "debug-led2";
-			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "debug-led3";
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	pwm-beeper {
-		compatible = "pwm-beeper";
-		pwms = <&pwm8 0 5000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_adc: regulator-vref-adc {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-adc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&adc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc1>;
-	num-channels = <3>;
-	vref-supply = <&reg_vref_adc>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	eeprom@0 {
-		compatible = "anvo,anv32e61w", "atmel,at25";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		spi-cpha;
-		spi-cpol;
-		pagesize = <1>;
-		size = <8192>;
-		address-width = <16>;
-	};
-};
-
-&fec1 {
-	pinctrl-0 = <&pinctrl_enet1>;
-	/delete-node/ mdio;
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy2>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-
-		ethphy2: ethernet-phy@2 {
-			reg = <2>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-};
-
-&pwm8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm8>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rx-during-tx;
-	rs485-rts-active-low;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
-	voltage-ranges = <3300 3300>;
-	bus-width = <4>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
-	voltage-ranges = <3300 3300>;
-	bus-width = <4>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
-
-	pinctrl_adc1: adc1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
-			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0xb0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO	0x100b1
-			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI	0x100b1
-			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK	0x100b1
-			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x100b1	/* ECSPI1-CS1 */
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b009
-		>;
-	};
-
-	pinctrl_enet2_mdio: enet2mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp{
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_gpio: gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0	/* DOUT1 */
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* DIN1 */
-			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x1b0b0	/* DOUT2 */
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0	/* DIN2 */
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x1b0b0	/* LED H14 */
-			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0	/* LED H15 */
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* LED H16 */
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
-			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001f8b0
-			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001f8b0
-		>;
-	};
-
-	pinctrl_pwm8: pwm8grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_HSYNC__PWM8_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DATA04__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_NAND_DATA05__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS	0x1b0b1
-			/*
-			 * mux unused RTS to make sure it doesn't cause
-			 * any interrupts when it is undefined
-			 */
-			MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
-			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1 {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x100b1	/* SD1_CD */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY	0x30b0
-		>;
-	};
-};
diff --git a/arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/dts/imx6ul-kontron-sl-common.dtsi
similarity index 90%
rename from arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi
rename to arch/arm/dts/imx6ul-kontron-sl-common.dtsi
index 09a83db..dcf88f6 100644
--- a/arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/dts/imx6ul-kontron-sl-common.dtsi
@@ -11,6 +11,11 @@
 	chosen {
 		stdout-path = &uart4;
 	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x10000000>;
+		device_type = "memory";
+	};
 };
 
 &ecspi2 {
@@ -55,6 +60,16 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_qspi>;
 	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
 };
 
 &wdog1 {
diff --git a/arch/arm/dts/imx6ul-kontron-n631x-som.dtsi b/arch/arm/dts/imx6ul-kontron-sl.dtsi
similarity index 62%
rename from arch/arm/dts/imx6ul-kontron-n631x-som.dtsi
rename to arch/arm/dts/imx6ul-kontron-sl.dtsi
index 9a11798..0580d04 100644
--- a/arch/arm/dts/imx6ul-kontron-n631x-som.dtsi
+++ b/arch/arm/dts/imx6ul-kontron-sl.dtsi
@@ -6,9 +6,9 @@
  */
 
 #include "imx6ul.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
+#include "imx6ul-kontron-sl-common.dtsi"
 
 / {
-	model = "Kontron N631X SOM";
-	compatible = "kontron,imx6ul-n631x-som", "fsl,imx6ul";
+	model = "Kontron SL i.MX6UL (N631X SOM)";
+	compatible = "kontron,sl-imx6ul", "fsl,imx6ul";
 };
diff --git a/arch/arm/dts/imx6ul-kontron-n631x-s-u-boot.dtsi b/arch/arm/dts/imx6ull-kontron-bl-u-boot.dtsi
similarity index 74%
copy from arch/arm/dts/imx6ul-kontron-n631x-s-u-boot.dtsi
copy to arch/arm/dts/imx6ull-kontron-bl-u-boot.dtsi
index d3f013c..daf4175 100644
--- a/arch/arm/dts/imx6ul-kontron-n631x-s-u-boot.dtsi
+++ b/arch/arm/dts/imx6ull-kontron-bl-u-boot.dtsi
@@ -4,4 +4,4 @@
  * Copyright (C) 2018 Kontron Electronics GmbH
  */
 
-#include "imx6ul-kontron-n6x1x-s-u-boot.dtsi"
+#include "imx6ul-kontron-bl-common-u-boot.dtsi"
diff --git a/arch/arm/dts/imx6ull-kontron-bl.dts b/arch/arm/dts/imx6ull-kontron-bl.dts
new file mode 100644
index 0000000..fa01646
--- /dev/null
+++ b/arch/arm/dts/imx6ull-kontron-bl.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6ull-kontron-sl.dtsi"
+#include "imx6ul-kontron-bl-common.dtsi"
+
+/ {
+	model = "Kontron BL i.MX6ULL (N641X S)";
+	compatible = "kontron,bl-imx6ull", "kontron,sl-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/dts/imx6ull-kontron-n641x-s-u-boot.dtsi b/arch/arm/dts/imx6ull-kontron-n641x-s-u-boot.dtsi
deleted file mode 100644
index d3f013c..0000000
--- a/arch/arm/dts/imx6ull-kontron-n641x-s-u-boot.dtsi
+++ /dev/null
@@ -1,7 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-#include "imx6ul-kontron-n6x1x-s-u-boot.dtsi"
diff --git a/arch/arm/dts/imx6ull-kontron-n641x-s.dts b/arch/arm/dts/imx6ull-kontron-n641x-s.dts
deleted file mode 100644
index 01aeea4..0000000
--- a/arch/arm/dts/imx6ull-kontron-n641x-s.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2019 Kontron Electronics GmbH
- */
-
-/dts-v1/;
-
-#include "imx6ull-kontron-n641x-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N641X S";
-	compatible = "kontron,imx6ull-n641x-s", "kontron,imx6ull-n641x-som",
-		     "fsl,imx6ull";
-};
diff --git a/arch/arm/dts/imx6ull-kontron-n641x-som.dtsi b/arch/arm/dts/imx6ull-kontron-n641x-som.dtsi
deleted file mode 100644
index 8a64aa9..0000000
--- a/arch/arm/dts/imx6ull-kontron-n641x-som.dtsi
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-#include "imx6ull.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N641X SOM";
-	compatible = "kontron,imx6ull-n641x-som", "fsl,imx6ull";
-};
diff --git a/arch/arm/dts/imx6ull-kontron-sl.dtsi b/arch/arm/dts/imx6ull-kontron-sl.dtsi
new file mode 100644
index 0000000..93f10eb
--- /dev/null
+++ b/arch/arm/dts/imx6ull-kontron-sl.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-kontron-sl-common.dtsi"
+
+/ {
+	model = "Kontron SL i.MX6ULL (N641X SOM)";
+	compatible = "kontron,sl-imx6ull", "fsl,imx6ull";
+};